Introduction to tooling

-




                      INTRODUCTION TO TOOLING



                 THE WORK TOOLING REFERS TO THE HARD WORK NECESSARY TO PRODUCE A PARTICULAR PRODUCT. THE MOST COMMON CLASSIFICATION OF TOOLING IS AS FOLLOWS 

  • THAT MEAL IS USED FOR PRESS WORKING TOOL.
  • MOLD AND DIES USED FOR PLASTIC MOLDING AND DIE CASTING.
  • FORGING DIES FOR HOT AND COLD FORGING.
  • JIGS AND FIXTURES FOR GUIDING THE TOOS AND HOLDING THE WORKPIECE.
  • GUAGES AND MEASURING INSTRUMENTS.
  • CUTTING TOOL SUCH AS DRILL REAMERS, MILLING CUTTERS , BROACHERS AND TAPS ETC.
     

Comments

Post a Comment

IF YOU HAVE ANY DOUBTS, PLEASE LET ME KNOW

Popular posts from this blog

G70 BOLT HOLE CYCLE HASS

-
Image
CNC PROGRAMMING G70 Bolt Hole Circle : I  - Radius *  J  - Starting angle (0 to 360.0 degrees CCW from horizontal; or 3 o clock position) L  - Number of holes evenly spaced around the circle *indicates optional This non-modal G code must be used with one of the canned cycles  G73 ,  G74 ,  G76 ,  G77 , or  G81 - G89 . A canned cycle must be active so that at each position, a drill or tap function is performed. See also G-code Canned Cycles section. % O60701 (G70 BOLT HOLE CIRCLE) ; (G54 X0 Y0 is center of the circle ) ; (Z0 is on the top of the part) ; (T1 is a drill) ; (BEGIN PREPARATION BLOCKS) ; T1 M06 (Select tool 1) ; G00 G90 G40 G49 G54 (Safe startup) ; G00 G54 X0 Y0 (Rapid to 1st position) ; S1000 M03 (Spindle on CW) ; G43 H01 Z0.1 (Activate tool offset 1) ; M08 (Coolant on) ; (BEGIN CUTTING BLOCKS) ; G81 G98 Z-1. R0.1 F15. L0 (Begin G81) ; (L0 skip drilling X0 Y0 position) ; G70 I5. J15. L12 (Begin G70...
Read more